The Wand by Ispire Induction eNail Review

By Chris
Last Updated on

The Wand by Ispire Induction eNail Review

We have been playing with The Wand by Ispire for over a month now and it is time to share with you how we find it.

The Wand is an induction eNail dabbing tool that makes dabbing as easy as possible. The guys at VPM were kind enough to send us a kit.

What is The Wand?

The Wand by Ispire is a revolutionary dabbing tool, that utilizes induction heating technology to heat up your banger.

Gone are the days when you have to heat your banger with a torch and try to guess when it is hot enough .. only to get it too hot or not hot enough at the end.

With The Wand, you simply turn your heater on, set it to your desired temperature and you are ready to heat your banger.

Pretty cool … and a lot less likely to burn yourself while dabbing (which really hurts by the way).

What’s in the Box?

The Wand by Ispire Induction eNail kit

In the box, you’ll get:
The Wand induction eNail,
2 x bangers (one straight and one curved)
2 x Induction dab cups
A carb cup
USB-C Charging Cable
User Manual

How to Use The Wand by Ispire

If you are used to dabbing and ever used a banger, you’ll find it really easy to get your head around The Wand.

Instead of heating your banger with a butane torch, you use the induction heater. Let’s go through the process step by step.

As the first step, you need to install the 2 x 18650 batteries that come in your kit. The two 2900 mAh battery goes into the vaporizer via the hatch door at the back as you can see below.

The Wand by Ispire batteries installed

The batteries came fully charged with the kit we received, however, if your batteries are not fully charged, put them on the supplied USB-C charger.

Get your favorite glass piece ready and insert one of the supplied bangers into a 14mm female piece. Then insert one of the supplied induction dab cups into the banger and you are good to go.

Glass bong with the wand banger and induction dab cup
Turn The Wand on by pressing the power button 5 times in a sequence. Once it is on, set the temperature to where you’d like it to be. The available temperature range is between 450 and 800 Fahrenheit (232 – 426 Celsius)

If you are new to dabbing and not sure, just set it to 710 degrees Fahrenheit. Next, simply place The wand around your banger and press the power button twice to start the automatic heating process.

You’ll notice an amber LED light flashing at one point at the red circle. Once this LED stops flashing, your banger is heated up, you can remove The Wand and add your concentrate to the dab cap.

Once you dropped your wax or shutter in the dab cap, cover it with the supplied carb cap and inhale. And there you go, you are dabbing without having to muck around with butane torches or any open flame.

Conclusion

If you are dabbing already or are interested in starting dabbing, The Wand might be a really useful device for you. Compared to butane torches it is really easy to use.

Having to be able to heat your banger to the exact temperature you set, makes the whole process totally bulletproof. We really like using The Wand and would recommend it to anyone who is into using concentrates.

If you’d like to pick up The Wand by Ispire yourself, you can do so here.

Chris

Chris

I have been vaporizing herbs for many years and working for VapeFuse in Australia and Europe. I try every vaporizer and fortunate enough to have this as part of my job. I feel like I am living the dream. I love to hear from other vapers, so always feel free to comment on my posts. Keep on vaping.

Leave a Comment

19 + seven =