We have been test-riding the Vibe Vaping System by Vaper Empire for the last few weeks. In this post, I’ll go through my experience using the device and share some images and a video with you.
The Vibe Vaping System is a nicely designed and very well presented device. The product makes a good impression as soon as you receive the box.
The nicely designed box is made with a magnetic lid and some useful instructions are printed on the back. Have a quick read before you start using your Vibe to get yourself familiar with the device.
In the box, you’ll find everything you need to get started with your vaping journey, apart from the e-liquid.
What’s included in the Vibe Complete Vaping System?
The first thing that you notice in the box is the Vibe Series 2000mAh battery. It is a powerful battery with 14 Watts regulated output.
Besides the battery, you’ll find a large, 4.5ml capacity Vibe Series Tank with a coil installed. You also get a replacement 1.5 Ohm coil, a micro USB charging cable, and a User Manual.
There are a couple of replacement mouthpieces included in the kit, as well as a little baggie with some replacement o-rings. A quite impressive starter kit, even among high quality vaping products!
The mod looks great, I really like the design. It is simple but elegant and proved to be very user-friendly over time. The tank has a conveniently large, 4.5ml storage capacity that gets me through the day without a single vape juice refill.
The device feels great and comfortable in the hand.
Using the Vibe Vaping System
I found the Vibe to be very easy to use. Before your first use, it is a great idea to go through the supplied User Manual of the device. The battery had some charge in it, however, as usual, I put it on the charger before the first use.
To charge the device, simply plug the supplied micro USB charging cable into the device. The LED around the power button goes solid red while the battery is charging as you can see in the picture below.
Once your battery is fully charged, the LED will turn to solid green. Time to take it off the charger. Pay attention to the LED around the power button, it is indicating your battery power as you are using your vape. While the LED is green when you are vaping, your battery is well charged.
Once your battery power drops below half of its capacity, the LED turns orange. When the LED turns red, your battery power is low and it is time to put it on the charger.
The next step is to fill up your tank. We got the tobacco flavour of the Classic Collection vape juice from Vaper Empire to test out with the Vibe. It is available nicotine-free and also with various nicotine strength (6, 12, 18 and 24mg/ml) If you are considering to choose a nicotine e-liquid, please remember that nicotine is an addictive substance. Bottle sizes are either 10ml or 30ml.
Filling the tank is super simple. Unscrew the top cap from your tank and aim the nozzle of your e-liquid towards the inside wall of the tank as you can see below.
Make sure you don’t overfill the tank. Once you added your e-liquid, screw the top cap back on.
At this stage, you can decide which mouthpiece you’d like to use as there are two kinds in your kit. There are two round shaped ones a wider flat one.
Once you decided on the mouthpiece you are ready to vape. Simply press and hold the power button while you are inhaling and enjoy the Vibe experience. The Vibe is engineered to a mouth-to-lung vaping experience.
Conclusion – Our Thoughts on the Vibe Mod
We have tested quite a few mods and other vaping products lately and we find the Vibe to be of top quality. It is well designed down to the last details and I enjoyed using it over the last few weeks. If you are on the market for a new vaping system that you can purchase in Australia, this one might be for you.